top of page
Car Mechanic_edited.jpg

Register a New Warranty​

Successfully Submitted. Check your email.

Need Help?

For any questions regarding your warranty please contact us

813-448-1351

info@certifiedceramics.com

Coverage

​

  1. Certified Ceramics warrants that with a Certified Ceramics installed coating; your vehicle’s ceramic finish will remain protected against:

    1. Oxidation

    2. Loss of gloss

    3. UV Damage

    4. Acid rain

    5. Paint chalking

  2. If any ceramic finish is shown to be adversely affected from exposure to these conditions or through normal use, as evidenced by a visible loss of paint gloss and providing that all of the terms of this warranty have been met, then such conditions will be remedied free of charge by Certified Ceramics and / or its authorized installers, who reserve the right to attempt repairs through professional surface reconditioning / polishing before complete ceramic reapplication at a Certified Ceramics authorized location.

General Conditions

​

  1. The vehicle must remain registered, for the entire duration of the warranty, for legal non-commercial road use.

  2. Only vehicles registered as passenger vehicles will be warrantied. Commercial vehicles of any kind will not be covered.

  3. Vehicles over 3 months old are required to have a machine polishing carried out by an approved applicator prior to application. Newer vehicles may also require a machine polish if advised by the approved applicator.

  4. In the event of damage / repair to the surface (i.e. accident repair) the vehicle must be taken to an approved applicator for retreatment to the repaired area, at the owner’s expense, within 30 days.

  5. Warranty is registered in the name of the vehicle owner and cannot be transferred.

  6. Should a product reapplication be required (e.g. vehicle accident) you or your insurer are liable for a reapplication fee, determined by Certified Ceramics.

  7. The vehicle exterior paintwork must be maintained and washed regularly. After washing insure that no water is left to dry on the coated surface, particularly within the first two (2) weeks after installation. In the event that your vehicle is exposed to high mineral-content water (“hard” or “soft” water) like that from some automated car washes, sprinkler systems or tap water in some areas, then all coated areas need to be dried as soon as possible with a microfiber cloth. Any water that is left to dry may form visible ringlets, which should be wiped off with vinegar until the mineral deposit is removed, as soon as possible.

  8. Successful registration must have been completed with true and accurate data.

bottom of page